Email format error
Email cannot be empty
Email already exists
6-20 characters(letters plus numbers only)
The password is inconsistent
Email format error
Email cannot be empty
Email does not exist
6-20 characters(letters plus numbers only)
The password is inconsistent
CNC lathes or lathes are usually used to produce turning parts, forming different materials into the desired shape. There are also many types of workpiece materials, so it is particularly important to choose a suitable CNC lathe for workpiece processing.
As the leading mini cnc lathe supplier, the following will introduce the selection principle and three elements of the cnc lathe.
The basic principle of determining the three elements: first, determine the anti grasping amount according to the cutting requirements, then look up the table to obtain the feed rate and then look up the table to calculate the main cutting speed formula. Reasonable cutting quantity selection is related to many factors, such as lathe, tool, workpiece, and process.
The method of reasonable selection of processing dose is as follows:
The specific value of cnc lathe factory shall be selected according to the specifications in the machine tool manual, the durability of the tools, and practical experience.
The selection of reverse grasping amount shall be determined according to the stiffness of the machine tool, fixture, workpiece, and the power of the machine tool. If the processing system allows, please select as many rear knives as possible.
In addition to the allowance left for future machining, the remaining rough machining allowance shall be reduced as much as possible at one time to greatly reduce the number of passes. Generally, on medium power machine tools, the post-cutting amount of rough machining is 8 to 10 mm (one side). The semi-finish machining of a small cnc lathe is 0.5 to 5 mm, and the precision machining range is 0.2 to 1.5 mm.
When the quality of the workpiece can be guaranteed, a higher feed speed can be selected to improve productivity. When cutting, deep hole machining, or finishing in cnc lathe factory, it is recommended to choose a lower feed speed. The feed speed shall be compatible with the spindle speed and the number of rear knives. During rough machining, the selection of feed is limited by cutting force.
If you are looking for a cnc lathe for sale, our company hopes to be your first choice and provide you with a high-quality Cnc Machining Service. Any interests, welcome to contact us!